Available on backorder
030/8: 2x 200A PDB / 4x 20cm 8AWG in india
Designed for Pixhawk 2.1 & Other Flight Controllers Dual 200A Sensors for Accurate Current Monitoring Supports UAVs with AUW up to 50kg Pre-Flight Battery Warm-Up Without Powering All Equipment High-Quality 8AWG Input Cables for Reliable Power Flow Includes 3.5mm Bullet Connectors & AMASS / AS150 Connectors Available on backorder
031/8: PC 2x 200A PDB / 4x 20cm 8AWG in India
Optimized for Pixhawk 2.1 & Other Flight Controllers Dual 200A Sensors for Precise Current Monitoring Built-In Sensor Hub X2 for Single or Dual Battery Usage 400A Continuous, 1200A Peak Current Handling Main Power Switch Allows Pre-Flight System Warm-Up High-Quality 8AWG Input Cables for Reliable Power Flow 
Mauch 090-4 14S HYB BEC 12.0V in India
₹3,500.00- High Efficiency: Stable 12V output with minimal heat.
- Wide Input Range: Supports 4-14S LiPo batteries (up to 60V).
- Ripple Removal: Switching power supply with linear LDO.
- Voltage Regulation: Precise 12V / 3A output.
- Quality Components: Uses Panasonic FC/FM capacitors.
- Compact & Lightweight: Only 16g, ideal for RC models and drones.
Mauch 025: PL 4-14S HYB-BEC / 2x 5.3V / 1x 5.0V / 1x 12.0V
₹15,899.00
025: PL 4-14S HYB-BEC / 4F
1x 024: PL 4-14S HYB-BEC / 2x 5.3V / 5.0V / 1x 12.0V / 3A
1x 040: PL - Series sensor cable / L=150mm
1x 050: Backup cable for Pixhawk 2.1 / L=150mm
1x 5.0V output cable (red/black) one site Molex Clik-Mate 1.25mm-4p, the other site open. / L = 150mm
1x 12.0V output cable (white/black) one site Molex Clik-Mate 1.25mm-4p, the other site open. / L = 150mm
1x Enclosure
59mm x 87mm x 13mm / 72g (without cables
Add to cart
Mauch 040: PL Sensor Cable In India
₹369.00
Connects a Sensor Board to the SEN. port on a PL BEC, a Sensor Hub X2, a Sensor Hub X8, or a Power-Cube
You can also use this cable to retrofit your own BEC
Molex CLIK-Mate 1.25mm 4p on both ends / L = 150mm
Add to cart
Mauch 042: PL – FC cable for Cube / Pixhawk2.1 In India
₹479.00
This cable is for the PL-Series BEC’s to connect to Cube/Pixhawk 2.1 or any other flight controller with a 6pin Molex CLIK-Mate2.0 connector.
Add to cart
Mauch 022: PL 4-14S HYB-BEC / 2x 5.3V in India
₹8,699.00
Product Description : Output 2x 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V)...
Add to cart
Mauch 001: PL-050 Sensor Board with CFK enclosure in India
₹3,899.00Highlights:
- Mauch 50A ampere and voltage meter. Instantly usable with the Mauch PL and PC series BEC and X2 sensor hub.
- The cable is included in the BEC. Usable up until 20S / 85V. Molex connector 4p.
Mauch 053: Power Cube-3/ V3 (PC 3/V30) in India
₹25,000.00Short Description:
- Power-Cube 3 "V3" with 3 outputs 2x 5.3V / 10A + 1x 12.0V / 10A
- Input voltage 4-14S, max. 60V
Mauch 084: 4-14S BEC (HS series) in India
₹3,600.00Short Description :
- Input and output is protected by Panasonic FC / FM capacitors.
- Input 4-14S LiPo / max. 60V .
- Output 5.3V / 3A -> +/- 0.05V.
Mauch 082: 2-6S BEC HS-series in India
₹1,699.00
Description: Input 2-6S LiPo / max. 28V. Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current. Input wrong polarity...
Add to cart
Mauch 085: 4-14S BEC (HS) for pixhawk 2.1 in India
₹3,791.00Short Description :
- Output 5.3V / 3A -> +/- 0.05V.
- Input 4-14S LiPo / max. 60V.